Wrought Iron Bases 44.076 for Decorative Gate and Fence Assemblies

Model 44.076 wrought iron bases are decorative metalwork components listed for gates, fences and staircase assemblies. For fabricators and component buyers, the main purchasing consideration is whether the base profile and connection dimensions match the planned assembly. Confirming these details before ordering helps avoid selecting a visually suitable component that does not fit the intended installation.

• Model-specific sourcing: reference 44.076 identifies the component for purchasing lists and repeat orders.
• Assembly options: the listing identifies easy assembly and welded installation as product features.
• Surface treatment choices: hot galvanizing, spray painting and powder coating are listed, subject to order confirmation.
• Shipment planning: iron pallet packaging is listed, with alternative packaging according to customer requirements.

The product should be specified as a decorative component unless SIMEN METAL provides documentation establishing an additional structural or anchoring function.

Check Base Geometry and Connection Fit Before Ordering Components

Match the Component to the Assembly Drawing

A decorative base must work with the surrounding metalwork, not simply resemble the required shape. Buyers should check the complete component profile, mating dimensions and intended attachment position against the fabrication drawing before approving the order.

• Overall geometry: confirm the height, width and profile shown in the product drawing.
• Connection dimensions: identify which surface or opening connects to the adjoining component.
• Assembly clearance: check available space around weld locations and adjacent decorative parts.

The published Base value is shown as ○16. Its meaning must be confirmed rather than assumed to describe an internal opening, external diameter or compatible bar size.

Keep Decorative Use Separate from Structural Performance

The listing does not provide load ratings, anchor details or structural test results. Buyers should not treat model 44.076 as a certified post anchor, load-bearing foot or structural mounting plate based on the product name alone.

• Gate projects: determine structural support through the approved frame, hinges and mounting system.
• Fence projects: verify post anchoring and frame connections independently of decorative components.
• Staircase projects: confirm railing loads and attachment requirements through the complete engineered assembly.

Where a structural function is required, request technical confirmation and supporting documentation before specifying the component.

Plan Welding and Protective Finishing Around the Assembly Sequence

Welded installation is included in the product listing, but the material grade and joining procedure are not specified. The fabricator should confirm compatibility with adjoining parts and determine the finishing sequence before production.

• Material verification: request the actual material grade before selecting the welding process.
• Joint preparation: confirm contact surfaces and access to the proposed attachment locations.
• Coating sequence: specify whether the component will be supplied unfinished or with the requested surface treatment.
• Post-fabrication treatment: agree how welded areas will be prepared and protected if finishing occurs before assembly.

SIMEN METAL lists hot galvanizing, spray painting and powder coating as finish options. Outdoor performance depends on the agreed material, surface preparation, coating system and maintenance conditions; no permanent rust-free service life is stated.

Wrought Iron Bases Specifications and Order Details for Model 44.076

The table below presents the published information and the details that should be clarified before issuing a purchase order.

Finish and Packaging Options with Custom Geometry Subject to Review

SIMEN METAL offers custom manufacturing across its component range. For model 44.076, buyers should separate listed order options from modifications that may require technical review, tooling or sample approval.

Order Options to Confirm

• Protective treatment: identify the requested galvanizing, painting or powder coating option.
• Color reference: provide the target color for painted or powder-coated orders and request availability confirmation.
• Packing arrangement: specify iron pallets or an alternative requirement suitable for handling and shipment.

Changes Requiring Feasibility Approval

• Connection geometry: provide a drawing showing the required opening, profile or mating dimensions.
• Overall dimensions: identify revised height, width and relevant tolerances.
• Material specification: state any required grade or section change.
• Decorative profile: submit a reference drawing for changes to the visible shape.

SIMEN METAL must confirm whether a proposed modification is feasible and whether it changes tooling costs, sampling requirements, MOQ or delivery time. Custom geometry is not presented as a standard feature of this model.

Application Checks for Gate Fence and Staircase Fabrication Buyers

Model 44.076 is relevant to buyers sourcing individual decorative components for fabrication or component distribution. Its suitability should be assessed against the specific assembly rather than a general application label.

• Gate workshops: confirm the base location, adjacent profiles and access for joining within the gate design.
• Fence fabricators: verify component fit and finish consistency across repeated sections.
• Staircase metalworkers: check the intended position against railing geometry and project clearances.
• Component distributors: confirm the model reference, drawing, finish and packing quantity for catalog and inventory planning.

For mixed-component orders, identify model 44.076 separately in the parts list so that quantity and finish requirements remain clear.

Typical Fence Fabrication Scenario for Confirming Base Component Fit

This illustrative procurement scenario is not a documented customer project. A fence fabricator is preparing a component list for repeated panels and is considering model 44.076 for a decorative detail within the assembly.

Buyer Requirement

The buyer needs to confirm the component's dimensions, how the listed Base value relates to the adjoining profile, and whether the selected material suits the planned joining method. The order must also identify a consistent finish and packing arrangement.

Solution

SIMEN METAL would be asked to provide a dimensioned drawing, clarify the published parameters and confirm the requested material and treatment. The fabricator would compare that information with the assembly drawing and seek sample approval if samples are available.

Result

The intended result is a verified component reference before bulk purchasing, with connection fit and finishing requirements agreed in advance. This provides a clearer procurement basis without assuming structural performance or reporting an unverified installation outcome.

Purchasing Questions About Model 44.076 Decorative Base Components

What are model 44.076 wrought iron bases used for?

The listing identifies staircase, fence and gate applications. Confirm the component's exact position and attachment method against the intended fabrication drawing.

Does the listed Base value ○16 mean it fits a 16 mm round bar?

That fit is not established by the published listing. Confirm the unit, whether the dimension is internal or external, and the required mating clearance before ordering.

Is the Width value 2.5 the material thickness?

The listing labels the value as Width and provides no unit or drawing explanation. Request clarification before treating it as thickness or another section dimension.

Can this base be used as a structural post anchor?

No structural or anchoring rating is published. Do not specify it as a load-bearing anchor without technical confirmation and appropriate supporting documentation.

What finishing options can be requested?

Hot galvanizing, spray painting and powder coating are listed. Confirm the treatment specification, color where applicable and finishing sequence for the order.

Can the connection size or profile be modified?

SIMEN METAL offers custom manufacturing, but changes to model 44.076 require review. Provide a dimensioned drawing and request confirmation of feasibility, MOQ, tooling and sampling requirements.

What are the MOQ and delivery terms?

MOQ is not published. The stated delivery time is usually 20–30 days for one 20-foot container; the schedule for the actual order and its production or dispatch basis require confirmation.

Can buyers request samples or material documentation?

Buyers can request information about sample availability and any available documentation. Sample fees, lead time, test records and certificates are not specified in the product listing.

About SIMEN METAL and Its Supply of Gate and Fence Base Components

SIMEN METAL was established in 2010 and supplies forged, cast and stamped components for gate and fence fabrication from Qingdao, China. Its product range includes bases and related ornamental parts for buyers assembling project-specific component lists. For model 44.076, procurement discussions should prioritize dimensional confirmation, joining compatibility and the required finish.

Information Needed for a Model 44.076 Base Component Quotation Request

Use the existing product inquiry form to provide the information relevant to the order:

• Model and quantity: specify 44.076 and the required number of pieces.
• Fit requirements: attach the relevant assembly drawing or identify the dimensions and connection details that need confirmation.
• Finish requirements: state the preferred treatment and color reference where applicable.
• Packing and delivery: provide the destination, required schedule and any alternative packaging needs.

If the project requires a sample, revised geometry or technical documentation, include the request so SIMEN METAL can confirm availability, feasibility and the applicable terms.