Spear Point Railheads 40.067.02 for Ornamental Railing Post Tops

Model 40.067.02 is a decorative spear point railhead with a tapered point, rounded teardrop-shaped body and square connecting stem. It is intended for use as an ornamental finish at the top of fabricated railing assemblies. The component can be considered for gate, fence and staircase metalwork where a defined spear-shaped detail is required.

• Recognizable spear profile: a tapered point transitions into a rounded, teardrop-shaped body.
• Defined connection stem: the lower square section is listed for assembly and welded installation.
• Published dimensions: Height 167, Width 48 and Base ○12 are listed, with units and parameter definitions requiring confirmation.
• Listed fabrication options: easy assembly, welded installation, hot galvanizing, spray painting and powder coating.

Confirm the railhead dimensions, material grade and connection geometry before adding the component to a railing or gate assembly.

Spear Point Profile for Decorative Railing Post Tops

Add a Defined Finishing Detail to Ornamental Metalwork

A railhead can provide a clear visual termination at the top of a vertical component. Model 40.067.02 uses a pointed upper section and a wider rounded body to create a recognizable spear-shaped silhouette.

• Railing posts: consider the component as a decorative top detail within the approved railing layout.
• Gate panels: review its position where a spear-shaped accent is included in the design.
• Fence sections: assess the component against repeated panel geometry and adjacent ornamental parts.

Its decorative role should be specified separately from the structural support and anchoring requirements of the complete assembly.

Check the Spear Profile Against Panel Proportions

The component has a tapered upper point and a wider rounded body. Its visual weight should be assessed against the picket or post it will finish, as well as the spacing and style of neighboring components.

• Component height: compare the listed Height 167 with the available post-top space.
• Maximum width: confirm how the Width 48 profile relates to adjacent bars and ornaments.
• Visual balance: review the spear point against the complete railing elevation rather than in isolation.

For stair railings, review the component within the sloped layout. A component selected for a level panel should not automatically be assumed to suit a stair section without checking the assembly drawing.

Confirm Base Dimensions and Welding Compatibility Before Ordering

The product page lists Base ○12. This notation requires clarification before it can be used to determine the compatible rail or post connection. Do not assume that it describes an internal opening, external diameter or a specific bar diameter.

• Base geometry: request a drawing clarifying the meaning and unit of the ○12 value.
• Connection fit: compare the stem or base with the intended post, picket or rail component.
• Attachment location: identify the proposed joint and confirm access for fabrication.
• Material compatibility: request the actual material grade before selecting a joining procedure.

Welded installation is listed as a feature, but the material grade and welding procedure are not stated. The fabricator should verify compatibility with the adjoining component before production.

Spear Point Railheads Specifications and Order Details for Model 40.067.02

The table separates published product data from details that require confirmation before a purchase order.

Protective Finishes for Spear Point Components and Outdoor Fabrication

SIMEN METAL lists hot galvanizing, spray painting and powder coating for model 40.067.02. The order should identify the required treatment and clarify whether finishing occurs before or after assembly.

• Hot galvanizing: confirm the specified process and its suitability for the component geometry.
• Spray painting: provide the required coating system and color reference.
• Powder coating: confirm pretreatment, color and the stage at which coating will be applied.
• Post-assembly work: agree how surfaces affected by joining or adjustment will be protected.

The dark appearance in a product image does not confirm a particular coating or corrosion-resistance period. Outdoor performance depends on material, surface preparation, treatment, fabrication details and maintenance.

Customization Requests for Spear Profiles Dimensions and Packing

SIMEN METAL offers custom manufacturing across its ornamental component range. For model 40.067.02, listed finishing and packaging options should be distinguished from changes that require technical review.

Listed Options to Confirm in the Order

• Surface treatment: specify hot galvanizing, spray painting or powder coating.
• Color requirements: provide a reference for painted or powder-coated orders.
• Packaging arrangement: identify iron pallets or describe the alternative packing requirement.

Design Changes Requiring Assessment

• Overall height or width: submit the target dimensions and relevant tolerances.
• Spear profile: provide a drawing for changes to the point shape, body profile or transition.
• Base connection: identify the required opening, stem geometry or mating dimensions.
• Material specification: state the proposed grade and section requirements.

SIMEN METAL should confirm feasibility, tooling, sampling, MOQ and delivery implications before a modified design is approved. These changes are not presented as standard configurations of model 40.067.02.

Application Planning for Railing Posts Gates and Fence Fabricators

The component is relevant to buyers sourcing a defined spear-shaped top detail for fabricated assemblies. Its suitability should be checked against the intended post, picket or rail component.

• Railing fabricators: assess the railhead against post-top dimensions and the planned railing elevation.
• Gate workshops: review the spear point where a defined top detail is included in the gate design.
• Fence manufacturers: check the component against repeated panel geometry and adjacent ornamental parts.
• Component distributors: use the model reference, drawing and finish specification for inventory planning.

For railings or other safety-related assemblies, compliance depends on the complete design, materials and connections, not on the decorative railhead alone.

Typical Railing Procurement Scenario for Specifying Spear Point Railheads

This is an illustrative procurement scenario, not a documented customer installation. A railing workshop is preparing a component list and is considering model 40.067.02 for selected post-top positions.

Buyer Requirement

The buyer needs to confirm that the listed Height 167, Width 48 and Base ○12 suit the intended post-top connection. The workshop also needs to agree on the material, joining method and protective finish.

Solution

SIMEN METAL would be asked to provide a dimensioned drawing, clarify the Base notation and confirm the requested material and finish. The workshop would compare the component with the assembly drawing and request a sample if available.

Result

The intended outcome is an approved component specification covering fit, connection, finish and quantity before bulk purchasing. This provides a clearer procurement basis without claiming an unverified installation result or structural performance.

Spear Point Railhead Questions About Dimensions Welding and Ordering

What is model 40.067.02 used for?

It is a decorative spear point railhead listed for staircase, fence and gate applications. Confirm its intended position and connection details against the assembly drawing.

What do the listed dimensions mean?

The page lists Height 167, Width 48 and Base ○12. Units and the meaning of Base require confirmation before the values are used in a fabrication drawing.

Does Base ○12 fit a 12 mm round bar?

That fit is not established by the published listing. Request clarification of the geometry and unit before assuming a compatible bar diameter.

Is this a structural post cap or anchor?

No structural rating or anchoring documentation has been supplied. Do not specify it as a load-bearing cap or anchor without technical confirmation.

Can the spear profile or Base connection be modified?

SIMEN METAL offers custom manufacturing, but changes require review. Submit a drawing and request confirmation of feasibility, tooling, sampling and MOQ.

Which finishes are listed?

Hot galvanizing, spray painting and powder coating are listed. Confirm the treatment, color where applicable and whether finishing occurs before or after assembly.

What are the delivery time, MOQ and sample terms?

The stated delivery time is usually 20–30 days for one 20-foot container. MOQ, sample availability, sample fees and the schedule for the actual order require confirmation.

About SIMEN METAL and Its Spear Point Components for Ornamental Metalwork

SIMEN METAL supplies forged, cast and stamped components for gate and fence fabrication from Qingdao, China. Established in 2010, the company offers more than 5,000 component types, including forged elements, balusters and ornamental railhead components. For model 40.067.02, purchasing discussions should focus on the spear profile, Base connection and required finish.

Quotation Details for Model 40.067.02 Spear Point Railhead Orders

Provide the following details through the existing product inquiry form:

• Model and quantity: specify 40.067.02 and the required number of pieces.
• Connection requirements: attach the relevant drawing and identify any Base, stem or post-top fit details requiring confirmation.
• Finish specification: state the requested treatment and color reference where applicable.
• Packing and delivery: provide the destination, required schedule and packaging preference.

Include any request for a sample, modified spear profile or technical documentation so SIMEN METAL can confirm availability, feasibility and the applicable terms.